MACH 208 Pin Adapter Board Pin Assignment
As the adapter should be of minimal size the power pins of the chip are
not brought to the perimeter ono to one. Instead there are
groups of power/ground pins on the board. This does not limit their
usuability in any ways. It is simply a deviation from the old design for
100 pins, where all pins were made available at the external connector.
Those pins that are labelled with pure numbers are the pins labelled "I/Ox"
(with x being a number) in the data sheet of the chip.
Pins with a name consiting of letters represent the function that they
serve. The naming is identical to the convention in the original data sheet
of the chip.
© Paul Elektronik, 1998-2002